Solar panels installed on a rooftop with clear sky and suburban background.

What Is a Solar Array

A solar array is a group of solar panels on your roof or on a ground mount, wired together to work as one unit. The panels are the part everyone sees, but a home system includes several other components: racking that holds the panels in place, an inverter that converts their power for your home, a battery that stores it, and the equipment that connects it all to your electrical panel and the grid. Knowing what each part does makes a proposal much easier to read.

Panels, strings, and arrays

The terms build on each other.

  • A solar panel (also called a module) is a single rectangular unit made of many solar cells sealed behind glass in a frame. Each panel turns sunlight into electricity.
  • A string is a group of panels wired together in series. Larger systems often have several strings.
  • An array is the full set of panels working together. A home might have one array on a single roof plane, or panels spread across two or three roof faces, a garage, or a ground mount. However they're arranged, they make up your system's array.

When you see a system size like "7 kW," that number describes the combined rated power of all the panels in the array. Our post on what a kilowatt-hour is explains how kilowatts and kilowatt-hours fit together.

Racking and mounting

Every array sits on a mounting system, usually called racking. On a pitched roof, attachments connect to the roof structure, rails run across them, and the panels clamp to the rails. On a flat roof, the racking holds the panels at a low tilt. On a ground mount, a sturdy frame anchored in the ground holds the array at the angle the design calls for.

The racking keeps your panels secure through decades of wind and weather and protects your roof. Our post on whether solar panels damage your roof explains how a careful install keeps the roof sound.

The inverter

Solar panels produce direct current (DC) electricity. Your home runs on alternating current (AC). The inverter converts one to the other.

There are two common setups. Microinverters are small units mounted under each panel, converting power right at the panel. String inverters are a single, larger unit, usually mounted on a wall near your electrical panel, that converts power for a whole string of panels. Both do the same job, and the right one depends on your roof and your system. Our post on microinverters and string inverters goes deeper.

Some batteries include their own built-in inverter, which can simplify the equipment on the wall.

The battery

Every system we design includes a home battery. It stores the electricity your array makes during the day so your home can use it in the evening, when electricity costs the most.

A Savings Battery stores and discharges every day to help lower your electricity bill. A Backup Battery does the same and also keeps your chosen circuits running during an outage. A battery's specs list both its capacity in kilowatt-hours (how much energy it stores) and its power in kilowatts (how much it can deliver at once). Our post on how many solar batteries you need explains how capacity matches a home.

The gateway or system controller

A battery set up for backup works with a gateway or system controller. This device watches the grid connection. If the grid goes down, it separates your home from the grid and lets your battery and panels keep your chosen circuits running. When the grid comes back, it reconnects automatically.

The backed-up circuits are often grouped on their own subpanel, sometimes called a critical loads panel. Our post on choosing what your battery backs up walks through how to choose those circuits.

Your electrical panel and disconnect

Your system connects to your home's main electrical panel, where its power feeds into your household circuits. A system also includes a disconnect, a switch that lets the system be safely shut off for service. Sometimes a home's electrical panel needs an upgrade to make room for solar and a battery, which we cover in our post on electrical panel upgrades for solar and battery.

Modern systems also include rapid shutdown equipment, which lets the panels on the roof be de-energized quickly. It's a safety feature built into the design.

The meter

Your utility meter measures what crosses between your home and the grid. With solar, it records the electricity you draw from the grid and the electricity your system sends out. Our post on what a smart meter is explains how it works with solar and a battery.

The monitoring app

Your system comes with a monitoring app that shows what your array produces, what your home uses, and how your battery charges and discharges. It's how you keep an eye on your system day to day. Our post on tracking your solar production shows what to look for, and if something ever looks off, our service team is there to help.

How power moves through your system

Here's how a typical day flows. In the morning, sunlight reaches the array, and the panels start producing DC power. The inverter converts it to AC, and it flows to your electrical panel to power whatever is running in your home.

By midday, the array often produces more than your home uses. The extra charges your battery. Once the battery is full, any remaining extra flows out through your meter to the grid.

In the evening, as the sun goes down, your battery takes over and powers your home with the energy it stored during the day. If your home needs more than the battery and panels can supply at any point, the grid fills in. If the grid goes down and you have a Backup Battery, the gateway separates your home from the grid, and your battery keeps your chosen circuits running.

Designed to work as one system

Each part has its own job, and the best results come from designing them together: an array sized for your roof and usage, an inverter setup that fits your panels, a battery matched to your goals, and an electrical connection planned for all of it. Our post on what to expect when you go solar covers how that design comes together, step by step.

We're 100% employee-owned; we've worked across Marin, Sonoma, and Napa since 1984, and we've installed more than 9,000 systems. We're licensed as a General Contractor (B) and Electrical Contractor (C-10), and we were one of the first companies in California to earn the state's C-46 solar license, so the same team designs, installs, and supports every part of your system.

Want to see what a solar and battery system would look like on your home? Contact SolarCraft or call Sonoma/Napa 707.778.0568 or Marin 415.382.7717.

Link copied to clipboard!